X250 2011 document holder help

[You must be registered and logged in to see this image.] [You must be registered and logged in to see this image.] 
Can anyone advise if the following is correct and any solutions as to a remedy?
TIA


If I remove the document compartment from above radio see fig
Can I then remove (rigid, not adjustable as older models) map holder with clip by removing two screws from locations as per fig , is there only the two screws?
Can the clip then be repaired or is it a full replacement? The reason being the clip has come away and only the spring remains.
If full part needed does anyone know part no or location of part?
Thanks again for help

I have got the answer to removal can anyonre help with the correct part name?
Thanks

Can't see any pictures Steve

SandJ wrote:

[You must be registered and logged in to see this image.] [You must be registered and logged in to see this image.] 
Can anyone advise if the following is correct and any solutions as to a remedy?
TIA


If I remove the document compartment from above radio see fig
Can I then remove (rigid, not adjustable as older models) map holder with clip by removing two screws from locations as per fig , is there only the two screws?
Can the clip then be repaired or is it a full replacement? The reason being the clip has come away and only the spring remains.
If full part needed does anyone know part no or location of part?
Thanks again for help

SanJ.....picked this info from another site...it may help it may not
 It is very easy to remove the whole module if it won't lift & you need to examine it in detail. The steps are:

Remove radio & (tin) radio 'cage'.
Remove two screws inserted at an angle that were hidden by the radio
Remove two screws at the end nearest the windscreen
Lift out the whole unit.

If it is a fixed lid then the screws to do that will be visible on the underside. It is a useful piece of kit - not so much as a clipboard but I've removed the sprung support that holds it in the 'up' position leaving room for a unit of 4 cigar lighter sockets and space to keep coins or keys. I'm investigating a spare one I bought to see if it could be hinged at the windscreen end to provide a place in the shade for a rear view camera monitor.

Plus you could get one from a comercial van reckers..

Strange that Ken I can see them lol
Thanks Mel it comes out with the two screws struggling to get definitive part name for a replacement. If knew name then I could source via breakers or similar. Mine is the fixed one Mel
Thanks again guys
By the way Mel you were lucky we found no boots to drop off as we are home now you are safe. Or are you? Lol

if yours is the fixed type, then it must have the air bag!

Yes Mel we have the passenger airbag

Keep well away from the air bag Steve, people have lost fingers working near them